Fluid Machinery

SCI(E) Journal 1. Kim, J., Ovgar, B., Cha K., Kim, J., Lee SB, Kim, K., Optimization of Aerodynamic and Aeroacoustic Performances of an Axial-Flow Fan, AIAA Journal, 2014; 52(9): 2032-2044
2. Nakano T, Fujisawa N, Oguma Y, Takagi Y, Lee SB. Experimental study on flow and noise characteristics of NACA0018 airfoil. Journal of Wind Engineering and Industrial Aerodynamics 2007; 95(7):511-531
3. Kim HJ, Lee SB, Fujisawa N. Computation of Unsteady Flow and Aerodynamic Noise of NACA0018 Airfoil Using Large-Eddy Simulation. International Journal of Heat and Fluid Flow 2006; 27(2):229-242
4. Nakano T, Fujisawa N, Lee SB. Measurement of Tonal-noise Characteristics and Periodic Flow Structure around NACA0018 Airfoil. Experiments in Fluids 2006; 40:482-490
5. Lee SB, Kim HJ, Runchal A. Large-Eddy Simualtion of Unsteady Flows in Turbomachinery. J. Power and Energy 2004; 218(4):463-475
6. Lee SB, Kim HJ, Kim JH, Song SJ. Computation of turbulent flows and radiated sound from axial compressor cascade. KSME International Journal 2004; 18(2):272-285
7. Lee SB, Jung KH, Kim JH, Kang SH. Cavitation Mode Analysis of Pump Inducer. KSME INTERNATIONAL JOURNAL 2002; 16(11):1497~1510
8. Lee SB, Jang SW, Jo CH, Hong SH. Flow Around a Pipeline and Its Stability in Subsea Trench. KSME INTERNATIONAL JOURNAL 2001; 15(4):500~509

Domestic Journal 1. Byun, H., Lee, J., Lee, S.-Y., Lee SB, Noise Source Identification of Forklift Engine Cooling Fan by Acoustic Scaling Function, 2018 Journal of KFMA (to appear)
2. Lee, Y., Lee, K., Lee SB, Computational Aero-Acoustics Based on Fluctuating Lift Forces on Rotating Fan Blades in Forklift Engine Room, 2018, Journal of KFMA (to appear)
3. Kim, J., Kim, J., Shin, S., Cha, K., Kim, K., Lee SB, Three-Dimensional Noise Analysis of an Axial-Flow Fan using Computational Aero-Acoustics, 2012, Journal of KFMA, Vol. 15(5), pp. 1~7
4. Lee., S., Choi, K., Jo, H., Song, W., Lee SB, Parametric Design of Axial Fan for Air-Conditioning Unit in terms of Aerodynamic Performance and Noise Level, 2010, Journal of KFMA, Vol. 13(5), pp. 24-29
5. Kim, J., Song, W., Lee SB, Kim, K., A Study on Aerodynamic and Noise Characteristics of a Sirocco Fan for Residential Ventilation, 2010, Journal of KFMA, Vol. 13(3), pp. 18-23
Conference Paper 1. Lee, D., Won, C., Lim, C., O, S.-J., Lee, J., ., Lee SB, DESIGN OF EFFICIENT, OUTER-ROTOR AXIAL FAN, 2016, 7th International Symposium on Fluid Machinery and Fluids Engineering,
2. Kim, J., Song, W., Lee SB, Kim, K., A Study on Aerodynamic and Noise Characteristics of Sirocco Fan for a Residential Ventilation, 2009, 2009 Fluid Machinery Conference, pp. 347~352
3. Lee, S., Jo, H., Song, W., Lee SB, The Performance and Noise Level Analysis of Axial Fan for Air-Conditioning Unit., 2009, 2009 Fluid Machinery Conference, pp. 293~298
4. Lee MJ, Song WS, Jo HJ, Choi KB, Park DJ, Lee SB. Aerodynamic Design of Slim and High-efficient Turbo-Fan. The 10th Asian International Conference on FLUID MACHINERY(2009); 1~6
5. Lee, M., Kim, N., Park, D., Jo, I., Lee SB., Aerodynamic Design of Slim and High-Efficient Turbo-Fan, 2008 KSME Fall Conference, pp. 2600 2605
6. Kim, Y., Lee, K., Kang, D., Lee SB., Standard for Ventilation Rate of Engine Room of Small-sized Ship. 2007, 2007 Fluid Machinery Conference, pp. 167~173
7. Kim, Y., Kim, N., Park, D., Moon, I., Lee SB., Design of Slim, High-efficient, 3-D Bladed Turbo Fan. 2007, 2007 KSME Fall Conference, pp. 1803~1809
8 Oh, K., Jo, W., Bae, C., Lee, S., Lee SB., Ju, P., Kim, J., Development of the Front End Cooling Fan of a Car, 2005, 2005 Fluid Machinery Conference, pp. 384~390
PATENT 1. Pump Inducer having Cavitation Free Construction, KR 0392786, 2003.07.14
2. Pump Inducer having Cavitation Free Construction, KR 0394473, 2003.07.30
3. A Range Hood Employing a Multi-stage Axial Fan, KR 0435600, 2004.06.02
4. Hybrid Multi-stage Axial Fan Provided with a Hood, KR 0599860, 2006.07.05
5. Hybrid Design Method for High-efficient and Low-Noise Multiple-sectioned Impeller of Backward-bladed TurboBlower, KR 0719103, 2007.05.10
6. Axial Fan and Multi Sectioning Design Method therefor, KR 0798103, 2008.01.18
7. Impeller having primary blades and secondary blades, PCT/KR2017/014809, 2017.12.15
COMPUTATIONAL AERO-ACOUSTICS AND NOISE ANALYSIS

SCI(E) Journal 1. Song WS, Lee SB, Shin DS, Prediction of thermoacoustic instability in Rijke tube using CFD-CAA numerical method, Journal of Mechanical Science and Technology 2011(3)
2. Song WS, Lee SB, Shin DS, Na Y. Active Control of Flow Noise Sources in Turbulent Boundary Layer on a Flat-Plate Using Piezoelectric Bimorph Film. Journal of Mechanical Science and Technology 2006; 0(11):1993-2001
3. N a Y, Shin DS, Lee SB.Effect of Grid Resolution on the Statistics of Passive Scalar in an Injection-Driven Channel. Lecture Notes in Computer Science 2006; 3984: 467-475
4. Shin DS, Na Y, Lee SB. Space-time Characteristics of the Wall Shear-Stress Fluctuations in an Axial Turbulent Boundary Layer with transverse Curvature. Journal of Mechanical Science and Technology2005; 9(8):1682-1891
5 Na Y, Shin DS, Lee SB. On the Filter Size of DMM for Passive Scalar in Complex Flow. Lecture Notes in Computer Science 2005; 3613:1127-1137
6. Jo CH, Lee SB, Shin YS, Hong SG, Min KH. Numerical and Experimental Study of Offshore Pipeline Stability in Trench. JOURNAL OF WATERWAY PORT COASTAL AND OCEAN ENGINEERING-ASCE 2002; 128(6):258~270
7. Kim JH, Lee SB. Supersonic Jet Noise Control vis Trailing Edge Modifications. KSME INTERNATIONAL JOURNAL 2001; 15(8):1174~1180
8. Kim JH, Samimy M, Lee SB. Effects of Compression and Expansion on Turbulence Intensity in Supersonic Boundary Layers. AIAA JOURNAL 2001; 39(6):1071~1077
Domestic Journal 1. Song, W., Shin, S., Lee SB., Characteristics of Wall Pressure over Wall with Permeable Coating,. 2012, J. KSME, Vol. 36(11), pp. 1055~1063
2. Kim, H., Jung, Y., Lee, J., Lee SB., Design Optimization by the Correlation between the Design Parameter and the Sound Quality of Small Turbo-fan, 2006 J. KSNV, Vol. 16(5), pp. 485~494
3. Son, J., Kim, H., Lee SB., Cho, S., Trailing Edge Noise Modification in a Blade Cascade, 2003, Journal of KFMA, Vol. 6(3), pp. 7~14
4. Park, Y., Song, W., Lee SB., Acoustic Analysis of Axial Fan using Kirchhoff Surface. 2003, J. KSME (B), Vol. 27(6), pp. 701~713
5. Lee, C., Lee SB., Kwon, O., Jeon, W., Radiated Sound from Compliant and Viscoelastic Plates, 2003, J. KSME (B), Vol.27(3), pp. 294~301
6. Lee SB., Kwon, O., Lee, C., An Experimental Study of Radiated Sound from Elastic Plate in a Turbulent Boundary Layer, 2001, J. KSME (B), Vol. 25(10), pp. 1327~1336
Conference Paper 1. Ovgar, B., Kim, J., Lee SB., NUMERICAL SIMULATION OF AERODYNAMIC NOISE FROM HAWT, 2012, 5th International Symposium on Fluid Machinery and Fluids Engineering, pp. 1~5
2. Kim, J., Kim J., Shin, S., Kim, K., Lee SB., Three-Dimensional Noise Analysis of an Axial-Flow Fan using Computational Aeroacoustics, 2011, 2011 Fluid Machinery Conference, pp. 65~70
3. Song, W., Lee SB., Numerical Prediction of Thermoacoustic Instability in Rijke Tube Using Non-linear Model for Heat Source, 2008, 2008 KSME Fall Conference, pp. 2524~2529
4. Song WS, Park JY, Lee SB. Numerical Prediction of Thermo-Acoustic Instability in Rijke Tube Using Non-Linear Model for Heat Source. The 37th International Congress & Exhibition on Noise Control Engineering (2008)
5. Song WS, Lee SB, Shin DS, Na Y. Passive control of thermo-acoustic instability in the horizontal Rijke Tube. The 1st International Symposium on Jet propulsion and Power Engineering(2006); 709~715
6. Lee SB, Song WS, Shin DS, Na Y. Thermo-Acoustic Instability in the horizontal Rijeke Tube. The 9th Western Pacific Acoustics Conference(2006); 905~913
7. Chung, Y., Kim, H., Lee, J., Lee SB., The Correlation between Design Parameter of Small Turbo Fan and Sound Quality, 2005, 2005 KSNV Conference, pp. 826~829
8. Kim HJ, Lee SB. Flow and Noise Characteristics of Airfoils in Upstream Disturbances with Application of Turbomachinery. The Sixth KSME-JSME Thermal and Fluids Engineering Conference(2005); 1~5
9. Lee JS, Song WS, Kim JY, Lee SB. Aero-Acoustical Design of Unevenly-Pitched and Multi-Curvature-Bladed Fans of Automobile Cooling-Pack System. The Sixth KSME-JSME Thermal and Fluids Engineering Conference(2005); 1~5
10. Park, K., Lee SB., Flow Noise Source of Rotating Cylinder in a Cavity Structure, 2004, 2004 Fluid Machinery Conference, pp. 629~634
11. Song, W., Chang, K., Lee SB., Acoustic Analysis of Plenum Fan using Kirchhoff-BEM, 2004, 2004 Fluid Machinery Conference, pp. 567~571
12. Song, W., Lee, J., Kim, J., Lee SB., Acoustic Analysis of Unevenly Pitched Fan of Automobile Cooling Pack System, 2004, 2004 Fluid Machinery Conference, pp. 89~93
13. Nakano T, Fujisawa N, Song WS, Lee SB. Periodicity of flow and tonal noise characteristics of NACA0018 airfoil. International Conference on Advanced Optical Diagnostics in Fluids, Solids and Combustion(2004)
14. Shin, S., Song, W., Lee SB., Active Controll of Flow Noise Sources of Flat Plate Using Piezo Film, 2004, 2004 KSNV Conference, pp. 924~927
15. Lee SB, Kim HJ, Song WS, Culick FEC, Fujisawa N. Flow and Noise Characteristics of Airfoils with Application to Turbomacinery. 2004 ASME Heat Transfer Fluids Engineering Summer Conference
16. Song, W.,, Lee, C., Lee SB, Shin, G., Radiated Sound from Compliant and Viscoelastic Plates. 2003, 2003 KSA Conference, pp. 94~97
17. Song WS, Lee CJ, Lee SB. Measurements of Turbulent Boundary Layer Wall Pressures. The 32nd International congress and exposition on noise control engineering(2003)
18. Kim KH, Lee JS, Jo JM, Lee SB. Low Noise Design of Partially-shroud Axial Fan for Home Appliance. The 32nd International congress and exposition on noise control engineering(2003)
19. Kim KH, Lee JS, Han CS, Lee MJ, Choi HS, Lee SB. Design of High Performance, Low Noise Shroud Axial Fan. The 32nd International Congress and Exposition on Noise Control Engineering(2003)
20. Lee SB, Son JM, Kim HJ. The Effects of Trailing Edge Modification in a Blade Cascade upon Radiated Sound. The 32nd International Congress and Exposition on Noise Control Engineering(2003)
21. Lee SB, Kim HJ, Song WS, Ahn KW. Aero-acoustic design of fan using inverse method. 4th ASME_JSME Joint Fluids Engineering Conference Honolulu(2003)
PATENT 1. Method For Designing A Low Noise Impeller Using An Inverse Design Method, KR 0469567, 2005.01.24
WIND ENERGY

SCI(E) Journal 1. Ovgar B, Lee SK, Lee SB, A Method of Micrositing of Wind Turbine on Building Roof-top by Using Joint Distribution of Wind Speed and Direction, and Computational Fluid Dynamics, Journal of Mechanical Science and Technology 2012; 26(12):1-8
2. Na Y, Lee SB, Shin DS. Laminar Diffusion Flame in the Reacting Mixing Layer. Journal of Mechanical Science and Technology 2007; 21(2):384-393
3. Song WS, Lee SB, Shin DS, Na Y. Thermo-Acoustic Instability in the Horizontal Rijke Tube. Journal of Mechanical Science and Technology 2006; 20(6): 905-913
4. Shin DS, Na Y, Lee SB. Linear Stability Analysis of the Reacting Shear Flow. Journal of Mechanical Science and Technology 2006; 20(8): 1309-1320

Domestic Journal 1. Park, J., Lee, M., Lee, S., Lee SB., An Experimental Study on the Aerodynamic Performance of High-efficient, Small-scale, Vertical-axis Wind Turbine, 2009, J. KSME(B), Vol.33(8), pp. 580~588
2. Kim, B., Kim, Y., Song, W., Lee SB., Nam, S., Kim, S., An Experimental Study on the Performance of the Vertical-Axis Wind Turbine, 2007, J. KFMA, Vol. 10(3), pp. 17~24
Conference Paper 1. Byun, H., Kim, H., Do, J., Lee, Y., Lee SB., Lee, K.-H., DEVELOPMENT OF 500W VERTICAL-AXIS WIND TURBINE SYSTEM, 2016, Proceedings of ISFMFE 2016
2. Choi, K., Shin, S., Lee SB., The Experimental Study of Power Performance of a Wind Turbine, 2012, 2012 KFMA Conference, pp. 5~7
3. Kim, D., Ovgar, B., Shin, S., Lee SB., Lee, S., Performance Evaluation of H-Type VAWT Rotor by CFD Technology, 2011, 2011 KFMA Conference, pp. 663~668
4. Kim HR, Lee JK, Park KH, Lee SB. DEVELOPMENT OF AN INNOVATIVE VERTICAL-AXIS, TWIN-ROTOR WIND TURBINE TO ADDRESS HIGH CAPACITY AND LESS ENVIRONMENTAL IMPACT. 8th World Wind Energy Conference and Exhibition(2009); 1~6
5. Lee JK, Park KH, Sabourin Tom, Logan Joel, Stoll Eric, Haug Bob, Park JY, Lee SB. SITE EVALUATION OF LOW NOISE, SMALL WIND TURBINE SYSTEM. 8th World Wind Energy Conference and Exhibition(2009); 8th World Wind Energy Conference and Exhibition(2009); 1~7
6. Park JY, Lee SB, Sabourin T, Park KH. A Novel Vertical-Axis Wind Turbine for Distributed & Utility Deployment. 7th World Wind Energy Conference(2008)
7. Park., J. Chang, J., Choi, Y., Lee, J., Kim, H., Seo, Y., Design of Small-scale, Vertical Wind Turbine and Performance Measurement, 2008, 2008 KWE Spring Conference, pp. 1~7
8. Lee SB, Song WS, Park JY, Kim YH. EXPERIMENTAL STUDY ON CONTROL PERFORMANCE OF JET-WHEEL-TURBO WIND TURBINE. The 9th Asian International Conference on Fluid Machinery(2007)
9. Lee SB, Song WS, Kim HR, Park JG. Design of Large-scale, High-efficient, Vertical Wind Turbine. ASME/JSME Fluids Engineering Conference 2007
10. Lee SB, Song WS, Kim HR, Park JG., Large-scale, High-efficient, Vertical Wind Turbine Revisited, 2007, 2007 KWE Spring Conference, pp. 165~171
11. Song, W., Park, J., Chun, H., Lee SB, Experimental Study on Control Performance of Jet-Wheel-Turbo Wind Turbine, 2007, 2007 KWE Spring Conference, pp. 81~87
12. Kim, B., Kim, Y., Song, W., Lee SB., Nam, S., Kim, S., The State-of-the-art and Its Prospects of Vertical-Axis Wind Tubine, 2006, 2006 KFMA Conference, pp. 395~400
PATENT - Load Shedding Algorithm Based on Day-ahead Wind Distribution Model for Roof-top Application, KR 10-2012-0003101, 2017.11.30
- Power Generation System having Vertical Wind Turbine of Jet-Wheel Type for Wind Power, KR 0810990, 2008.02.29
- Dual Rotor Wind Turbine, USA 8376711 B2, 2013.02.19
- Turbine Rotor for Vertical Wind Turbine and Vertical Wind Turbine System, KR 10-2009-107949
APPLIANCE AND FLUID POWER

Domestic Journal 1. Do, J., Kim, G. and Lee SB, Analysis of Flow Characteristics in Spool Valves of an Excavator with Various Notch Shapes. 2018, J. of KSME (B) (to appear)
Conference Paper 1. Do, J., Lee, Y., Shin, H. and Lee SB, Thermal and Acoustic Design of Mobile Hydraulic Vehicle Engine Room, 18th International Conference on Hydraulics and Pneumatics, 2016, Miami, USA
2. Chang, K., Lee SB., Bae, S., Development of Software for Duct Design and Noise Prediction of Ventilation System, 2003, 2003 KSHRAE Winter Conference,
PATENT 1. IAQ Control Method Based on Contaminant Concentration for Various Ventilation Modes of Energy Saving, and Network-based IAQ Control System, Registered, KR 0509332, 2005.08.11
2. Ventilation System Of Demand Control Type, Registered, KR 0556066, 2006.02.22
3. Hybrid System for Ventilation and Air-Conditioning, Registered KR 0583004, 2006.05.17
4. Demand Control Ventilation System, Registered KR 0585238, 2006.05.24
5. Roof Fan Controller and Its Algorithm for Ventilation Performance in Air Duct of Apartment, Registered KR 0696877, 2007.03.13
6. Fan Filter Unit Preventing Counterflow, Pending KR 10-2009-0130427, 2008.09.17
7. Negative pressure type high speed air jet clothes dryer, KR 1017514190000, 2017.06.21